★★★★★
Ruben was extremely helpful, patient and professional. One of my clients had a repair that needed to be completed within 48 hours and Ruben was able to get it done. I will definitely be recommending him to other clients!
Phones answered 24 hours, 7 days
When the lights go out, call All Lights.
Licensed electricians for homes, businesses and industrial plants. We are based in Riverside and work across the Inland Empire and San Diego County, from a dead outlet at midnight to a new transformer at a plant.
- 5.0 on Google from 43 reviews
- Commercial · Industrial · Residential
- Riverside, CA
Photo: one of our industrial switchgear jobs
What's going on?
Pick what you are seeing. We will tell you how urgent it is, what you can safely do right now, and what we check when we get there. Then call, or send it to us with one tap.
Call now
Treat this as an emergency.
Right now
- If you see smoke or flame, get out and call 911 first.
- If it is safe to reach the panel, switch off the breaker for that room, or the main.
- Stop using the outlet or switch, and keep anything plugged into it unplugged.
What we check
- The device and the box behind it
- Loose or overheated connections on that circuit
- The breaker and its connection at the panel
Call now
Check the street first, then call.
Right now
- Look outside. If the neighbors are dark too, it is the utility, so report it to them.
- If only your place is out, look for a tripped main breaker in the panel.
- If the main trips again right away, leave it off and call us.
What we check
- The main breaker and the service coming in
- The meter base and the connections at the panel
- Any circuit pulling the main down
Call today
Call today. Do not keep resetting it.
Right now
- Note what was running when it tripped.
- Unplug what you can on that circuit and reset it once.
- If it trips with nothing plugged in, leave it off.
What we check
- Whether the circuit is overloaded or shorted
- A failing breaker
- Damaged wiring or a bad device on the run
Call today
Worth a look soon, sooner if it is the whole house.
Right now
- Try a new bulb. If one fixture flickers, it may be just the bulb or the fixture.
- If lights dim when the AC or dryer starts, note it for us.
- If the whole house flickers, call us today.
What we check
- Loose connections at the fixture, switch or panel
- Voltage at the panel under load
- The neutral and the service connection
Book a visit
Book a visit. Check two things first.
Right now
- Press the reset button on any GFCI outlets nearby, including the garage, bathrooms and outside.
- Check the panel for a breaker sitting in the middle position.
- If neither brings it back, leave it alone and call.
What we check
- Tripped or failed GFCI protection upstream
- Loose backstab connections
- A broken wire in the run
Book a visit
Book a visit and a load check.
Right now
- List what you want to add: a car charger, AC, a spa, a shop.
- Take a photo of your panel label and the main breaker.
- Send it with the form below so we arrive ready.
What we check
- What your service and panel can carry
- Whether you need a new circuit, a sub-panel or a bigger service
- Permits for the change
Book a visit
Book a service call for the property.
Right now
- Note which poles or wall packs are out and whether they are on one row.
- Check the time clock or photocell setting if you can reach it.
- Tell us the property address and when the lot is quietest.
What we check
- Lamps, drivers and photocells
- The timer or controls
- Underground feeds between poles
Homes, shops and plants, all with one crew.
The All Lights logo says commercial, industrial, residential, and we mean all three. The same electricians who replace a breaker in a kitchen also wire transformers in a factory.
01
Panel upgrades and service changes
New breaker panels, bigger services, sub-panels, surge protection and generator interlock kits, with the permit and inspection handled.
02EV charger installation
Level 2 chargers for garages, driveways and business lots, on a dedicated circuit, with a load check on the panel first.
03Troubleshooting and repairs
Tripping breakers, dead outlets, flickering lights, burnt wiring and GFCI trouble, found and fixed properly.
0424/7 emergency electrician
Power out, burning smell, sparks or a panel that will not reset. The emergency line is answered 24 hours, every day.
05Lighting, inside and out
Recessed and LED lighting, fans, security and landscape lights, and parking lot poles and wall packs for commercial properties.
06Commercial and industrial electrical
Tenant improvements, warehouses and plants: high-voltage panels, transformers, machine and motor wiring, controls and underground runs.
Our own jobs, as photographed.
These are photos from our own work, not stock: panels and transformers, a parking lot dug up for an underground run, a new pole light and a home charger. Swipe or scroll for more.
Customers keep naming Ruben.
Quoted as written from our Google profile, which has 43 reviews averaging 5.0 stars. Where a review ends in …, Google cut it off there.
★★★★★
Team did a great job for our project. We had them Run 20 amp circuit 15 ft. And a ceiling fan deletion. They were very informative every step of the way. We appreciate their hard work. We will definitely be reaching out for future home projects. Thank you Ruben and team!
★★★★★
Great customer service! Ruben explained everything that needed to be done thoroughly, and why it was needed. Prices are very reasonable. We will definitely use them again in the future. The team was on time and very respectful. …
★★★★★
A++ work!! Ruben has an Amazing work ethic shared by his team and he thoroughly explained everything, even went out of his way to get new parts during the install(I ordered wrong items). Had several cameras installed, tvs mounted + hidden …
★★★★★
Amazing electrical guru Ruben. He is so skillful, knowledgeable , experienced and very top notch. Initial visit, He came to do throughly analysis , very impressive and detailing to my needs. …
From the phone call to the last screw.
Most jobs go the same way. You know the price before we start, and the permit is our job, not yours.
01
Call any hour
The emergency line is (951) 545-8822 and it is open 24 hours. Tell us what is going on and we will tell you whether it can wait.
02
We come and look
An electrician comes out, finds the cause, and explains what needs doing and why before anything gets touched.
03
A price up front
You get the price before the work starts. If something changes once a wall or panel is open, you hear about it first.
04
Done to code
We do the work to California code, pull the permit when the job needs one, and clean up before we leave.
The Inland Empire, and down to San Diego.
We are based in Riverside, so the cities around it get the quickest response. Each page below covers the houses, the permits and the problems we see in that city.
Home base
Riverside
Panels, repairs, chargers and commercial work from the Wood Streets to Orangecrest, plus the 24-hour emergency line.
Southwest of RiversideCorona
Service upgrades, chargers, lighting and tenant work from the Circle to South Corona.
West of RiversideNorco
Sub-panels, underground feeds, outdoor lighting and repairs for Norco's large lots.
Northwest of RiversideEastvale
EV chargers, garage circuits, lighting and surge protection for Eastvale's newer neighborhoods.
Next door to RiversideJurupa Valley
Industrial and warehouse work in Mira Loma, and home repairs, panels and outdoor power in Pedley, Rubidoux and Glen Avon.
San Diego CountySan Diego
Panel upgrades, EV chargers, lighting and commercial work in San Diego and the surrounding cities.
We also take jobs in Moreno Valley, Fontana, Rancho Cucamonga, Ontario, San Bernardino, Perris, Menifee, Murrieta, Temecula and Lake Elsinore. Not sure we come to you? Call (951) 545-8822 and ask.
Lights out, or something new to wire? We pick up at any hour.
Yes. Our emergency line, (951) 545-8822, is answered around the clock, seven days a week. For a burning smell, sparks or a dead panel, call that number rather than filling in the form. For anything that can wait, the office line is (951) 351-2020.
Yes. We come out, look at the job and give you a price before any work starts. For an emergency call we will tell you on the phone what the visit involves.
Yes, that is a large part of our work. We do tenant improvements, warehouse and plant wiring, high-voltage panels, motor controls and parking lot lighting, as well as everyday service calls for homes.
Yes. All Lights Electrical Service is licensed and insured. Ask for the license number when you call, and you can check any California contractor on the CSLB website.
Yes, when the job needs one. Panel changes, service upgrades, new circuits and EV chargers usually need a permit from your city. We file it, do the work and meet the inspector.
We are based in Riverside and cover the Inland Empire, including Corona, Norco, Eastvale, Jurupa Valley, Moreno Valley, Fontana and Rancho Cucamonga, and we take jobs in San Diego County too. If you are not sure, call (951) 545-8822 and ask.
Tell us what is going on.
Call, email or send the form. If the power is off, something smells hot or you see sparks, call the emergency line instead of writing.
- 24-hour line(951) 545-8822
- Office(951) 351-2020
- Emailalllightselectricalservice@gmail.com
- Based inRiverside, CA. Inland Empire and San Diego County.
- HoursOpen 24 hours, 7 days